Viton o-rings, seals last longer, cut costs.

Viton® o-rings and seals can help you reduce your lifetime costs by preventing seal failures, extending maintenance intervals, handling more aggressive fluids and higher temperatures, increasing safety and meeting stringent environmental regulations.

Engineer knows viton lasts longer
* Copyright for photograph

Reduce Your Lifetime Costs

Viton® o-rings far outlast o-rings made from nitriles and other general-purpose elastomers. That means you can extend service intervals and stretch maintenance budgets. Viton® has excellent mechanical properties, resistance to extrusion, resistance to chemicals and heat, retention of elastic properties over time and excellent resistance to atmospheric oxidation, sunlight and ozone.

Cut Unscheduled Downtime

Viton® o-rings and seals are so reliable they will kept protect against unscheduled downtime. If you offer warranties on your products, you can extend the warranty periods with confidence.

Increase Temperature Capability

In many applications, rubber parts are stressed by accidental temperature excursions as well as by increases in operating temperatures designed to increase production. In some situations, Viton® o-rings can serve continuously at 204°C with excursions to 315°C.

Resist Aggressive Fluids

Viton® o-rings perform well in a wide range of aggressive fluid environments. Systems can tolerate changes in fluids and have more versatility for broader application.

Comply With Tougher Regulations

Environmental regulations have raised the stakes for leaks, spills, and emissions. Viton® o-rings and seals help guard against these problems to improve manufacturing and automotive operations.

Proven Performance

Since its introduction in 1957, Viton® o-rings have solved sealing and other problems in major industries:

Aircraft and Aerospace
Automotive
Chemical Processing and Transportation
Off-Highway and Heavy-Duty Equipment
Petroleum Refining and Transportation

Major uses of Viton® o-rings include bonded seals, radial lip seals, caulks, coatings, vibration dampeners, expansion joints, gaskets, o-rings, piston seals, custom shapes, and stock rod and sheets.

A Tough Contender

The compatibility of Viton® fluoroelastomers with some important chemical media is shown in the table below. The capabilities of other elastomers shown for comparison can be helpful when you are considering changing materials to increase reliability or accommodate more severe operating conditions.

Viton® also offers mechanical ruggedness so o-rings, seals and components resist damage during installation and use. Basic mechanical property data listed show that Viton® compares favorably with other elastomers in tensile strength, range of hardness and resistance to compression set.

Viton® retains sealing force to prevent leaks even after compression for long periods in severe environments. After 100 hours in air at 150°C, Viton® retains more than 90% of its original sealing force, while o-rings and seals of fluorosilicone, polyacrylate and nitrile retain only 70, 58 and 40% respectively.

Viton® has excellent resistance to atmospheric oxidation, sunlight and ozone. After 20 years of exposure to direct sunlight, o-rings and seals of Viton® showed no traces of cracking. Also, Viton® did not crack after one year in an atmosphere containing 100 ppm ozone.

Common Name	Neoprene	Ethylene Propylene	Nitrile	Silicone	Fluoro- silicone	Viton®	Viton® ETP	Kalrez®
Chemical Compatibility¹
Lubricating and Fuel Oils	2	4	1	4	1	1	1	1
Hydraulic Oils	2	4	1	2,3	1	1	1	1
Fireproof Hydraulic Fluids	2	1	3	3	4	4	2	1
Vegetable Oils, Animal Fats	2,3	2,3	1	1,3	1	1	1	1
Gasoline (high octane)	3,4	4	1,2	4	1	1	1	1
Kerosene	2	4	1	4	1	1	1	1
Aromatic Hydrocarbons	4	4	2,4	4	2,3	1	1	1
Aliphatic Hydrocarbons	2	4	1	4	2	1	1	1
Alcohols	1	2	1	2	1,2	1	1	1
Ketones	3,4	1	4	4	4	4	2	1
Halogenated Solvents	4	4	4	4	1,2	2	1,2	2
Water (>80°C)	3	1	1	1	1	1	1	1
Concentrated Acids	4	4	4	4	3	1-2²	2	1
Diluted Acids	2,3	2	3,4	4	3	1	1	1
Alkalis	1,2	1	2	1,2	2	4	1	1
Properties
Max. Continuous Service Temperature, °C	105	150	121	204	175	204	204	316
Low Temperature (Tg), °C	–50	–54	–25 to –30	–85 to –125	–65	–8 to –30²	–11	–8
Tensile Strength, MPa	25	17	27	10	10	20	15	15
Hardness, Durometer, Shore A(D)	30–95	40–90	40–95	30–90	40–80	55–95	65–95	65–95

Data has been drawn from tests at DuPont Performance Elastomers facilities and industry sources. Data is presented for use only as a general guide and should not be the basis for design decisions.
1 Key: 1 = Excellent 2 = Good 3 = Fair 4 = Not Recommended
2 Rating is type dependant.

Next: Viton® Has Superior Thermal Stability

Viton® is a registered trademark of DuPont Performance Elastomers

Viton® O-rings and Seals Last Longer