Basic Information
Home
Contact Information
Quality Policy

Viton O-rings Seals
Viton® o-rings, seals
Viton® news
Viton® news archive

Kalrez O-rings Seals
Kalrez® o-rings, seals
Kalrez® news
Kalrez® news archive

Simriz O-rings Seals
Simriz® o-rings, seals

Elastomers
Elastomers
Elastomer properties
Fluid compatibility

Mechanical Seal Design
Operating principles
Classification
Application limits
Drive mechanisms
Loading devices
Mating ring types
Gland design

O-ring, Seal Design
O-ring, seal design
3 Considerations
Finite element
Static seals
Axial static 1
Axial static 2
Trapezoidal
Conical static
Boss seal
Radial static
Dynamic seals
Rotary
Reciprocating
To consider 1
To consider 2
To consider 3
Semiconductor
Vacuum sealing
Permeation
Outgassing
Trapped gas
Seal failure
AS568A sizes

Products
Products

Industries
Industries

Miscellaneous
Problems solved
O-ring, seal tips
Glossary of terms

Resources
Resources

(303) 758-2728

Dynamic Seal Gland Dimensions

Dynamic Glands - Rotary Seals

Measurements in inches									Measurements in millimeters
Size	W	Depth	Comp.	Width	Fill	Radius	Clear.		Radius	Width	Depth	W	Size
AS 568	0.070	0.066	5%	0.077	97%	0.010	0.014		0.25	1.96	1.68	1.78	AS 568
-000	± .003	± .001	± 5%	± .002	± 12%	± .005	± .002		± .13	± .05	± .03	± .08	-000
AS 568	0.103	0.098	5%	0.110	99%	0.010	0.014		0.25	2.79	2.49	2.62	AS 568
-100	± .003	± .001	± 4%	± .002	± 9%	± .005	± .002		± .13	± .05	± .03	± .08	-100
AS 568	0.139	0.134	3%	0.146	99%	0.018	0.018		0.46	3.71	3.40	3.53	AS 568
-200	± .004	± .002	± 4%	± .002	± 9%	± .008	± .002		± .20	± .05	± .05	± .10	-200
B2401	0.075	0.073	2%	0.083	93%	0.010	0.014		0.25	2.11	1.85	1.90	B2401
P-	± .003	± .001	± 5%	± .002	± 11%	± .005	± .002		± .13	± .05	± .03	± .08	P-
B2401	0.094	0.091	3%	0.102	96%	0.010	0.014		0.25	2.59	2.31	2.40	B2401
P-	± .003	± .001	± 4%	± .002	± 9%	± .005	± .002		± .13	± .05	± .03	± .08	P-
B2401	0.138	0.135	2%	0.145	98%	0.018	0.018		0.46	3.68	3.43	3.50	B2401
P-	± .004	± .002	± 4%	± .002	± 8%	± .008	± .002		± .33	± .05	± .05	± .10	P-

Note: Gland diameter should provide for no greater than 3% to 5% stretch (based on nominal o-ring ID).