o-rings and seals

Problem Solving Products, Inc. Logo
Problem Solving Products, Inc.

7108 S. Alton Way, Unit I
Centennial, Colorado 80112
(303) 758-2728

(303) 758-2728

Home > Products > Page 3

O-Rings and Seals
Products Page 3

  Product Description
 rod wiper  Metal Encased Wipers Metal clad rod wiper. An excellent heavy duty rod scraper, with a metal case to enable press-in applications. Used where dirt and ice conditions are severe, such as found on bulldozers, graders, and backhoes. Back
'D' style wiper  'D' Style Wipers Snap-in rod wiper. Used in applications where conditions are abrasive and severe. This simple design snap-in wiper is commonly used in most hydraulic and downhole applications. Back
   'AN' Style Wipers Snap-in rod wiper. A light duty wiper for use on pneumatic and hydraulic cylinders where conditions are not severe. Commonly used in machine tool cylinders, such as valve operators and positioning cylinders. Back
   'H' Style Wipers Snap-in rod wiper. A light duty wiper for use on pneumatic and hydraulic cylinders where conditions are not severe. The double lip can also act as a rod seal in low pressure pneumatic cylinders. Back
   'K' Style Wipers Snap-in rod wiper. A light duty wiper for use on pneumatic and hydraulic cylinders where conditions are considered moderate. Commonly used on telescopic cylinders, dump trucks, lift trucks, and tailgate cylinders. Back
   'D' Style Wipers Stepped Stepped snap-in rod wiper. A medium duty rod wiper that fits into a stepped groove. This wiper has the similar characteristics to the D-style wiper. Back
   Double Acting Fluid Seal Double acting piston ring with anti-extrusion rings. This seal consists of a composite NBR 80 Shore and NBR impregnated cotton seal element. Complete with anti-extrusion wear rings for higher pressure capabilities. Back
   Single Acting Fluid Seal Single acting rod & piston seal. This seal is similar to the polyseal. A good seal for lower pressure gland applications and for piston head applications where an adequate bearing is provided. Back
   Uni-Rings Double acting rod & piston seal. The uniring consists of two bonded laminae. A hard 60 duro 'D', abrasion resistant seal, and a softer resilient activating lamina, which functions as an expander. Therefore radial preload and appropriate pressure activation are assured. Back

 

 

 

 

 

 

 

 

 

 

 

 

 

 

We are located in the Denver Technological
Center in a suburb of Denver, Colorado
©1997-2017, Problem Solving Products, Inc.
Website Map | Privacy Statement | Terms of Use